Table of Contents
Advertisement
Switching the machine to pause mode:
Press the Start/Pause button to switch the
machine to pause mode. Pause symbol will
flash on the display.
Changing the programme selection after
programme has started:
Programme cannot be changed when a
programme is running. You need to pause
the operating programme if the Child Lock
is not active and select a new programme.
This action will cancel the current pro-
gramme.
The selected programme starts
anew.
Changing the auxiliary function, speed
and temperature:
Depending on the step the programme has
reached, you can cancel or activate the aux-
iliary functions. See "Auxiliary Function Se-
lection"
You can also change the speed and tem-
perature settings. See "Spin Speed Selec-
tion" and "Temperature Selection".
It gives out an audio warning if
change is not allowed.
The loading door will not open if the
water temperature in the machine
is high or the water level is above
the loading door baseline.
7 Maintenance and Cleaning
Please read the "Safety Instruc-
tions" section first!
Service life of your product extends and fre-
quently experienced problems will be re-
duced if it is cleaned at regular intervals.
6.13 Cancelling the Programme
When the machine is turn on and off the
programme gets cancelled. Press and hold
On/Off button for 3 seconds.
If you turn the programme selection
button when the Child Lock is en-
abled, the programme will not be
cancelled. You should cancel the
Child Lock first.
If you want to open the loading
door after you have cancelled the
programme but it is not possible to
open the loading door since the wa-
ter level in the machine is above the
loading door baseline, then turn the
Programme Selection knob to
Pump+Spin programme and drain
the water in the machine.
6.14 End of Programme
End warning appears on the display when
the programme is completed.
The product automatically shuts down if no
buttons are pressed for 10 minutes. Display
and all indicators are turned off.
Completed programme steps will be dis-
played if you press the On/Off button.
7.1 Cleaning the Detergent Drawer
When to clean
• When you open the dosing tank cover
and see a thickened non-fluid detergent
or softener,
EN / 32
Advertisement
Chapters
Table of Contents
