Cancelling The Programme; End Of Programme; Maintenance And Cleaning; Cleaning The Detergent Drawer - Smeg WNP04SEA User Manual

Changing the programme selection after
programme has started:
The programme change is allowed when the
current programme is running unless the
Child Lock is enabled. This action will cancel
the current programme.
The selected programme starts
anew.
Changing the auxiliary function, speed
and temperature:
Depending on the step the programme has
reached, you can cancel or activate the aux-
iliary functions. See "Auxiliary function selec-
tion"
You can also change the speed and temper-
ature settings. See ''Spin speed selection"
and "Temperature selection".
The loading door will not open if the
water temperature in the machine is
high or the water level is above the
loading door baseline.

7 Maintenance and Cleaning

Please read the "Safety Instructions"
section first!
Service life of your product extends and fre-
quently experienced problems will be re-
duced if it is cleaned at regular intervals.

7.1 Cleaning the Detergent Drawer

Clean the detergent drawer at regular inter-
vals (once every 4 to 5 wash) as mentioned
below to prevent accumulation of powder
detergent.

6.13 Cancelling the Programme

The programme is cancelled when pro-
gramme selection knob is turned to a differ-
ent programme or machine is turned off and
on again using the programme selection
knob.
If you turn the programme selection
knob when the Child Lock is en-
abled, the programme will not be
cancelled. You should cancel the
Child Lock first.
If you want to open the loading door
after you have cancelled the pro-
gramme but if it is not possible to
open the loading door since the wa-
ter level in the machine is above the
loading door baseline, then turn the
Programme Selection knob to
Pump+Spin programme and drain
the water in the machine.

6.14 End of Programme

End symbol appears on the display when the
programme is completed.
If you do not press any button for 10
minutes, the machine will switch to OFF
mode. Display and all indicators are turned
off.
Completed programme steps will be dis-
played if you press On/Off button.
Clean the syphon if excess amounts of water
and fabric softener mixture remains in the
softener compartment.
a. Press the marked part of the syphon
within the softener compartment and
then pull the drawer towards yourself to
take it out.
EN / 31