Cancelling The Programme; End Of Programme; Maintenance And Cleaning; Cleaning The Detergent Drawer - Smeg WN82SEC User Manual

Table of Contents

Advertisement

Changing the programme selection after
programme has started:
The programme change is allowed when
the current programme is running unless
the Child Lock is enabled. This action will
cancel the current programme.
The selected programme starts
anew.
Changing the auxiliary function, speed
and temperature:
Depending on the step the programme has
reached, you can cancel or activate the aux-
iliary functions. See "Auxiliary function se-
lection"
You can also change the speed and tem-
perature settings. See ''Spin speed selec-
tion" and "Temperature selection".
The loading door will not open if the
water temperature in the machine
is high or the water level is above
the loading door baseline.

7 Maintenance and Cleaning

Please read the "Safety Instruc-
tions" section first!
Service life of your product extends and fre-
quently experienced problems will be re-
duced if it is cleaned at regular intervals.

7.1 Cleaning the Detergent Drawer

Clean the detergent drawer at regular inter-
vals (once every 4 to 5 wash) as mentioned
below to prevent accumulation of powder
detergent.

6.13 Cancelling the Programme

The programme is cancelled when pro-
gramme selection knob is turned to a dif-
ferent programme or machine is turned off
and on again using the programme selec-
tion knob.
If you turn the programme selection
knob when the Child Lock is en-
abled, the programme will not be
cancelled. You should cancel the
Child Lock first.
If you want to open the loading
door after you have cancelled the
programme but if it is not possible
to open the loading door since the
water level in the machine is above
the loading door baseline, then turn
the Programme Selection knob to
Pump+Spin programme and drain
the water in the machine.

6.14 End of Programme

End symbol appears on the display when
the programme is completed.
If you do not press any button for 10
minutes, the machine will switch to OFF
mode. Display and all indicators are turned
off.
Completed programme steps will be dis-
played if you press On/Off button.
Clean the syphon if excess amounts of wa-
ter and fabric softener mixture remains in
the softener compartment.
EN / 30

Advertisement

Table of Contents
loading

Table of Contents