Temperature Selection; Spin Speed Selection - Smeg WNP96SLAAUK User Manual

mended to select Cottons programme with
prewash and set the temperature to
50-60°C.
Many types of clothing are correctly detec-
ted and safely washed in Automatic pro-
gramme.
• Outdoor/Sport
You can use this programme to wash
sports and outdoors garments that contain
cotton/synthetics mix and water repellent
covers such as gore-tex etc. It makes sure
your garments are washed gently thanks to
special rotating movements.

6.6 Temperature Selection

Whenever a new programme is selected,
the recommended temperature for the pro-
gramme appears on the temperature indic-
ator. It is possible that the recommended
temperature value is not the maximum
temperature that can be selected for the
current programme.
Press the Temperature Adjustment button
to change the temperature. Temperature
decreases gradually.
No change can be made in pro-
grammes where temperature ad-
justment is not allowed.
You can also change the temperature after
the washing starts. This change can be
made if the only washing steps allow it.
If you scroll to cold wash option
and press Temperature Adjustment
button again, the recommended
maximum temperature for the se-
lected programme appears on the
display. Press the Temperature Ad-
justment button again to decrease
the temperature.

6.7 Spin Speed Selection

Whenever a new programme is selected,
the recommended spin speed of the selec-
ted programme is displayed on the Spin
Speed indicator. It is possible that the re-
commended spin speed value is not the
maximum spin speed that can be selected
for the current programme.
Press the Spin Speed Adjustment button to
change the spin speed. Spin speed de-
creases gradually.
Then, depending on the model of the
product, "Rinse Hold l_l " and "No Spin _"
options appear on the display.
If you are not going to unload your laundry
immediately after the programme com-
pletes, you can use Rinse Hold function in
order to prevent them from getting wrinkled
when there is no water in the machine.
This function holds the laundry in the final
rinsing water. If you want to spin your laun-
dry after the Rinse Hold function:
1. Adjust the Spin Speed.
2. Press Start / Pause. The programme will
resume. Machine drains the water and
spins the laundry.
If you want to drain the water at the end of
the programme without spinning, use No
Spin function.
No change can be made in pro-
grammes where spin speed adjust-
ment is not allowed.
You can change the spin speed after the
washing starts if the washing steps allow it.
Changes cannot be made if the steps do
not allow it.
EN / 26