Important safety information
The RBRC Seal means that the manufacturer is voluntarily
participating in an industry program to collect and recycle nickel-
metal hydride rechargeable batteries when taken out of service
within the United States. These batteries may be taken to a
participating local retailer of replacement batteries or recycling
center. You may call 1-800-8-BATTERY® for locations accepting
spent Ni-MH batteries.
The RBRC Seal and 1-800-8-BATTERY® are registered trademarks of
Call2recycle, Inc.
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless telephones):
Wireless Technology Research, LLC (WTR), an independent research entity, led
a multidisciplinary evaluation of the interference between portable wireless
telephones and implanted cardiac pacemakers. Supported by the U.S. Food and
Drug Administration, WTR recommends to physicians that:
Pacemaker patients:
Should keep wireless telephones at least six inches from the pacemaker.
f
Should NOT place wireless telephones directly over the pacemaker, such as in a
f
breast pocket, when it is turned ON.
Should use the wireless telephone at the ear opposite the pacemaker.
f
WTR's evaluation did not identify any risk to bystanders with pacemakers from
other persons using wireless telephones.
ECO mode
This power conserving technology reduces power consumption for optimal battery
performance. The ECO mode activates automatically whenever the handset is
synchronized with the telephone base.
Especially about telephone answering systems
Two-way recording: This unit does not sound warning beeps to inform the other
party that the call is being recorded. To ensure that you are in compliance with any
federal or state regulations regarding recording a telephone call, you should start
the recording process and then inform the other party that you are recording the
conversation.
SAVE THESE INSTRUCTIONS
3
Need help?
Do you have a question about the BL102-1S and is the answer not in the manual?
Questions and answers
How to set my phone handset back to English from French
To change the language from French to English on the AT&T BL102-1S handset, follow these steps:
1. Press MENU on the handset when it is not in use.
2. Enter 364# to reset the LCD language to English.
This method allows you to switch back to English without navigating through French menus.
This answer is automatically generated