Winplus JUMP STARTER PRO User Manual page 5

CHARGING YOUR USB DEVICES:
Use the original manufacturer's USB cable that came with your
device and plug into one of the USB output ports. You can
charge two devices at the same time. One of the ports has a
maximum output of 2.4A while the other has a maximum output
of 2.1A. Press the power button once to begin charging your
device. The power level indicator will show the battery level and
turn off after 30 seconds.
To check the power capacity
again, simply press the power
button once.
LED SPOTLIGHT
Press the spotlight button once to turn
on the spotlight.
Press the spotlight button a second time to
change the brightness level to 50%.
Press the spotlight button to turn off Spotlight.
LED LANTERN LIGHT
Press the lantern button once to turn on the
lantern light for full brightness.
Press the lantern button a second time to
change the brightness level to 50%.
Press the lantern button again to turn off.
5