Advertisement
12-Installation
12.8 level the dryer
Level the dryer side to side(Fig. 12-11):
Place the gradienter at the centre back of the dryer.
Adjust the rear feet until the dryer is level side to side.
Never fully screw the feet completely from their housings.
Level the dryer front to back(Fig. 12-10):
Place the gradienter on the left side.
Adjust the front left foot (wind down).
Repeat the above for the right foot.
Double check the dryer is balanced(Fig. 12-10):
Place the gradienter at the centre front of the dryer.
Ensure the dryer does not rock
If dryer is not balanced repeat the above steps.
After levelling, the corners of the dryer cabinet should be clear of the floor and the dryer.
must not rock in any direction.
12.9 Draining
Remove the black hose from the connection
Uncoil the drain hose (included with your
(Fig. 12-13).
Place the other end of the drain hose into a tub or standpipe(Fig. 12-14).
28
in any direction.
at the back of the dryer(Fig. 12-12).
dryer) and connect it to the black hose
EN
Temp.
Advertisement
