Advertisement
EN
Troubleshooting without display-codes
Problem
Possible cause
Tumble dryer
• Poor connection to the power
fails to operate.
• Power failure.
• No drying program is set.
• Device has not been switched
• The water tank is full.
• The door is not closed properly.
Tumble dryer
• The laundry has reached the
fails to operate
and the display
shows .
Drying time is
• The programme setting is not
too long and
the results are
• The fi lter is clogged.
not satisfactory
• The evaporator is blocked.
• The tumble dryer is overloaded.
• The laundry is too wet.
• The vent duct is blocked.
Remaining time-
The remaining time will be adjus-
on the display-
ted continuously based upon the
stops or skips.
following factors:
• fabric of laundry.
• loading weight.
• Moisture degree of the laundry.
• Ambient temperature.
11-Troubleshooting
supply.
on.
dry level defi ned by the pro-
gramme.
correct.
Possible solution
• Check connection to the pow-
er supply.
• Check the power supply.
• Set a drying program.
• Switch on the device.
• Empty the water tank.
• Close the door properly.
• Check the program setting is
appropriate or not.
• Make sure the program is set
correctly.
• Clean the fi lter screen.
• Clean the evaporator.
• Reduce the amount of laun-
dry.
• Spin the laundry completely
before drying.
• Check and clean the vent duct.
The automatic adjustment is a
normal operation.
25
Advertisement
