Table of Contents
Advertisement
Operation (NZ8*****7**)
Suggested settings for cooking specific foods
The numbers in the table below are guidelines. The power level required for
various cooking methods depend on a number of variables, including the quality
of the cookware being used and the type and amount of food being cooked.
Power level
Cooking method
Warming /
14-15
Sautéing / Frying
8-11
Intensive frying
7-10
Frying
5-7
Boiling
Steaming /
2-4
Stewing / Boiling
1-2
Melting
NOTE
You will need to adjust the power level according to specific cookware and foods.
20 English
Examples for Use
Warming large amounts of liquid, boiling
noodles, searing meat, browning goulash,
braising meat
Steak, sirloin, hash browns, sausages,
pancakes / griddle cakes
Schnitzel / chops, liver, fish, rissoles, fried
eggs
Cooking up to 1.5 l liquid, potatoes,
vegetables
Steaming and stewing of small amounts of
vegetables, boiling rice and milk dishes
Melting butter, dissolving gelatine, melting
chocolate
Max Boost
The Max Boost function makes additional power available to the each cooking
zones. (example : bring a large volume of water to the boil)
After Max Boost times, the cooking zones automatically sets back to the highest
heat setting.
NOTE
•
In certain circumstances, the Max Boost function may be deactivated
automatically to protect the internal electronic components of the hob.
For example, It is impossible to output max power on Flex zone rear and Flex
zone front at the same time.
•
Refer to your model's Cooking zones specification for Max Boost time.
Power management
The cooking zones have a maximum power available to them.
If this power range is exceeded by switching on the Max Boost function, Power
Management automatically reduces the power level of cooking zone.
After then, the display changes from the set power level to maximum possible
power level.
Using the Flex zone (Only for Flex zone applied models)
The Flex function can operate complete 1 side cooking zone for using large size
cookware. (example : oval cookware, fish kettle)
1.
Press the Flex zone
key.
2.
For setting and adjusting the power level, use the Control bar.
NOTE
•
Press the Flex zone
key during operating, Flex zone function will be off.
•
If you press the Flex zone
key while each burner operation different level,
burner set at a high level.
Advertisement
Table of Contents
