Flex Zone Plus (Only For Flex Zone Plus Applied Models) - Samsung NZ84C5047 Series User Manual

Table of Contents

Advertisement

Operation (NZ8*****8**)

Flex zone Plus (Only for Flex zone plus applied models)

Cooking Zone 1
Cooking Zone 2
Cooking Zone 3
Cooking Zone 4
With Flex zone Plus, you can use a combination of different cooking zones to
enlarge the cooking area. Press the Flex zone
follows.
Cooking Zone 1
Cooking Zone 1
Cooking Zone 2
Cooking Zone 2
Cooking Zone 3
Cooking Zone 3
Cooking Zone 4
Cooking Zone 4
NOTE
When using only one cooking zone, the diameter of the bottom of the
cookware must be less than 14 cm.
The hob may take 5-10 seconds to recognise the position of cookware.
26 English
The Flex zone is the large cooking area
located on the left side of the hob (see the
figure left) that is specially designed to
accommodate multiple pots and pans of
varying shapes and sizes at once. The Flex
zone has four zones that are operated by
individual inductors, allowing you to cook
regardless of where cookware is placed on a
cooking zone.
key to use the cooking zone as
Cooking Zone 1
Cooking Zone 1
Cooking Zone 2
Cooking Zone 2
Cooking Zone 3
Cooking Zone 3
Cooking Zone 4
Cooking Zone 4
Noises may occur while the hob recognise the cookware.
Do not remove cookware during cooking. For safety purposes, the hob
automatically stops if cookware has been removed for more than 5 seconds.
Using the Flex zone Plus (Only for Flex zone plus applied models)
1.
Press the Flex zone
key.
For setting and adjusting the power level, use the Power level key.
2.
NOTE
If you press the Flex zone
key during operating, Flex zone function will be
off.
If you press the Flex zone
key while each cooking zone is operating at
different levels, it will be automatically adjusted to higher level.
When moving or adding cookware to a new Flex zone, cancel the current
operation, and then press the corresponding Cooking zone
the cooking zone.
key to activate

Advertisement

Table of Contents
loading

Table of Contents