Table of Contents
Advertisement
Before you start
Correct positioning
Correct
Flat-bottomed cookware and straight
sides
The cookware meets or exceeds the
recommended minimum size for the
cooking zone.
The cookware rests completely on the
hob surface.
The cookware is properly balanced.
18 English
Incorrect
Cookware with curved or warped
bottoms or sides
The cookware does not meet the
minimum size required for the current
cooking zone.
The cookware rests on the hob trim or
does not rest completely on the hob
surface.
The heavy handle causes the cookware
to tilt.
Energy saving tips
Cookware suitability test
You can test cookware to see if they are suitable for use with the product.
1.
Press the On/Off
key for 1-2 seconds to turn on the hob.
2.
Press the Lock
key for 3 seconds to activate the child safety lock.
3.
Press the right front Timer
key for 3 seconds to activate the cookware
suitability test mode.
4.
Place the cookware on the one of the cooking zones, and then press and hold
the Max Boost key for 3 seconds.
Display
0
1 - 7
8 - 10
Follow these tips to save power
consumption.
•
Always put cookware on a cooking
zone before you turn the corresponding
burner on.
•
Keep the cooking zones and cookware
bases clean. Otherwise, more power will
be consumed.
•
Firmly close the cover of cookware
if available. This will reduce power
consumption.
•
Turn the working burner off before
the end of the cooking time. Use the
residual heat to keep food warm.
Description
Cookware is unsuitable
Cookware is suitable, but inefficient
Cookware is suitable
Advertisement
Table of Contents
