Installing The Camera - Dell P139G Service Manual

Hide thumbs Also See for P139G:
Table of Contents

Advertisement

About this task
The following images indicate the location of the camera and provide a visual representation of the removal procedure.
Steps
1. Peel the conductive tape that secures the camera cable in place.
2. Lift the latch and disconnect the camera cable from the connector on the camera module.
3. Carefully pry and lift the camera module from the display back cover.

Installing the camera

Prerequisites
NOTE:
The camera installation procedure is applicable only for Latitude 5320 laptop and not for the 2-in-1 configuration.
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the camera and provides a visual representation of the installation procedure.
78
Removing and installing components

Advertisement

Table of Contents
loading

This manual is also suitable for:

Latitude 5320 2in1P138gLatitude 5320

Table of Contents