Dell P139G Service Manual page 83
Hide thumbs
Also See for P139G:
- Service manual (139 pages) ,
- Setup and specifications manual (30 pages) ,
- Re-imaging manual (18 pages)
Table of Contents
Advertisement
About this task
The following image indicates the location of the smart card reader and provides a visual representation of the installation
procedure.
Steps
1. Align and place the smart card reader on the palm-rest assembly.
2. Replace the two screws (M2x2.5) to secure the smart card reader to the palm-rest assembly.
3. Connect the smart card reader cable to its connector and close the latch.
4. Connect the clickpad FPC to its connector and close the latch.
Next steps
1. Install the speakers.
2. Install the battery.
3. Install the
base
cover.
4. Follow the procedure in
after working inside your
computer.
Removing and installing components
83
Advertisement
Table of Contents
