Yamaha ARIUS YDP-184 Owner's Manual page 83

To call up the desired parameter:
Select a Song as necessary, press the [FUNCTION] button several times to select "Song" menu, then use the [
buttons to select the desired parameter.
[>] [>]
[<] [<]
Edit Quantize Quantize
Strength
Execute
Track Delete Track
Execute
Tempo Change Cancel
Execute
Voice Change Track
Execute
Others Quick Play
Track Listen Track
Start
Play Track
NOTE
Tempo of Song playback can be set on the display called up by pressing the [TEMPO] button. For instructions, refer to page 40.
[>]
Description
[<]
The Quantize function allows you to align all the notes in
the current MIDI Song to the correct timing, such as 8th
note or 16th note.
1. Set the Quantize value to the smallest notes in the
MIDI Song.
2. Set the Strength value which determines how
strongly the notes will be quantized.
3. Move the highlight to "Execute" then press the
[>] button to actually change the MIDI Song data.
Deletes a specific track data of the current MIDI Song.
1. Select the desired track to be deleted.
2. Move the highlight to "Execute," then press the
[>] button to actually delete the specified track data.
Changes the tempo value of the current MIDI Song as
data. Before calling up the "Song" menu display, set the
desired Tempo value for changing.
Move the highlight to "Execute," then press the [>] button
to actually change the Tempo value as MIDI Song data.
Changes the Voice of a specific track in the current
MIDI Song to the current Voice as data.
1. Select a track of which the Voice will be changed.
2. Move the highlight to "Execute," then press the
[>] button to actually change the Voice as MIDI Song
data.
– This parameter enables you to specify whether a Song
that starts from the middle of a bar, or a Song with a
silence prior to the first note, should be played from the
first note or from the top of the bar (rest or blank). This
parameter is useful for a MIDI Song that starts with a
short one-or two-beat pick-up or lead-in.
This lets you play back only the selected Track to listen
to its contents. To do this, select a Track, move the
highlight to "Start," then press and hold the [>] button to
start playback from the first note. Playback continues
while holding the [>] button.
– This parameter enables you to specify the tracks for
playing back on this instrument. When "1&2" is
selected, only tracks 1 and 2 will be played back, while
tracks 3 to 16 will be transmitted via MIDI. When "All" is
selected, all tracks will be played back on this
instrument.
Song Menu
]/[ ]/[<]/[>]
u d
Default setting Setting range
1/16 Refer to "Quantize
setting range."
(page 84)
100% 0% – 100%
Refer to "Strength
setting range."
(page 84)
– –
Track 1 Track 1 – Track 16
– –
Differs depending –
on the Song
– –
Track 1 Track 1 – Track 16
– –
On On, Off
Track 1 Track 1 – Track 16
All All, 1&2
YDP-184 Owner's Manual
83