Yamaha ARIUS YDP-184 Owner's Manual page 15

4.
Press the [P] (Standby/On) switch at the right end of the
front panel to turn the power on.
The display located at the left end of the front panel and the power indicator
located below the left end of the keyboard both light up.
5.
Play the keyboard.
While playing the keyboard, adjust the volume level by using the [MASTER
VOLUME] slider. For details, refer to "Setting the volume — [MASTER
VOLUME]" on page 17.
6.
After you use the instrument, press and hold the
[P] (Standby/On) switch for a second to turn the power
off.
The display and the power indicator are turned off.
7.
Close the key cover.
Slide the cover toward you
and gently lower the cover
over the keys.
[P] (Standby/On) switch
The power indicator
lights up.
CAUTION
Be careful to avoid catching your fingers
when opening or closing the cover.
Getting Started — Playing the Piano
NOTICE
Press only the [P] (Standby/
On) switch when turning the
power on. Any other
operations, such as pressing
the keys, buttons or pedals may
cause the instrument to
malfunction.
CAUTION
Even when the instrument is
turned off, electricity is still
flowing to the instrument at
the minimum level. When you
are not using the instrument
for a long time or during
electrical storms, make sure
you unplug the AC power
plug from the wall AC outlet.
YDP-184 Owner's Manual
15