Removing The Door - Pelgrim NF925B Manual

Disassembly of the oven door
In normal use, the oven door will not need
to be removed. However, should you want
to do this, please follow the instructions
below.
Warning! The oven door is
very heavy and should be well
supported.
Open the door and tilt lock A in both hinges

fully to the outside.
Close the oven door halfway, so that the

tension is off of the springs (the oven door
will be at an angle of approximately 30°).
Hold the door securely at both sides, move

along with the closing movement of the
door, while simultaneously lifting the door.
Turn the lower part of the door with the

hinges B towards you. The door has now
been removed.
Clean the door. The door may optionally be

tilted so as to clean the space between the
glass with a soft bottlebrush.
To put the door back in place, proceed in

reverse order. The door hinges are in the
extended position.
Slide the door hinges into the hinge

openings.
Tilt the door in the horizontal position and

click the hinges in place by tilting lock A
back inwards.
Please note: the hinge protectors
must always be secured again after
replacing the oven door.