Speakers
Removing the speakers
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
Remove the
base
cover.
Procedure
1. Disconnect the speaker cable from the system board.
2. Note the cable routing, and remove the speaker cable from the routing guides on the palm-rest and keyboard assembly.
3. Remove the speakers, along with the cable from the palm-rest and keyboard assembly.
Replacing the speakers
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Using the alignment posts, align and place the speakers on the palm-rest and keyboard assembly.
NOTE:
Replace the rubber grommets if they are pushed up while replacing the speakers.
2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
3. Connect the speaker cable to the system board.
28
Removing and installing components
computer. After working inside your computer, follow the instructions in
computer. After working inside your computer, follow the instructions in
After
After