Memory modules
Removing the memory modules
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
Remove the
base
cover.
Procedure
1. Locate the memory module on the system board and lift the mylar that covers the memory modules.
2. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot until the memory module pops
up.
3. Remove the memory module from the memory-module slot.
Replacing the memory modules
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Locate the memory modules on the system board and lift the mylar that covers the memory modules.
16
Removing and installing components
computer. After working inside your computer, follow the instructions in
computer. After working inside your computer, follow the instructions in
After
After