Advertisement
Operation Guide 5382/5465/5508
Selecting a Mode
Press C to cycle between the modes as shown below.
To return to the Timekeeping Mode from any other mode, hold down C for about
two seconds.
In any mode (except a setting mode), press B to illuminate the display.
Home Time : hour and minutes
Timekeeping Mode
World Time : hour and minutes
E-10
General Functions (All Modes)
The functions and operations described in this section can be used in all of the
modes.
Auto Return Features
The watch will automatically return to the Timekeeping Mode if you do not perform
any operation for a certain amount of time, as described below.
Mode
Alarm
2 to 3 minutes
Time or other setting mode
(information fl ashing on the display)
Scrolling
The B and D buttons are used on the setting mode to scroll through data on the
display. In most cases, holding down these buttons during a scroll operation scrolls
through the data at high speed.
E-12
2. Holding down B again as you press C will cause the hands to return to their
normal positions (normal timekeeping).
Note
This operation can be performed in any mode. In the case of a setting mode
(setting fl ashing on the screen), the hands will move out of the way automatically,
even if you do not perform the above operation.
Watch button functions are the same regardless of whether the hands are move
out of the way or at their normal positions.
Changing to another mode will cause the hands to move back to their normal
positions.
The hands also will move back to their normal positions automatically if no
operation is performed for about one hour.
E-14
To swap your Home City and World Time City
In the Timekeeping Mode, hold down D for about three seconds.
This swaps your Home City and World Time City.
Example: To swap the Home City (TYO) and World Time City (NYC)
Current Home City (TYO) time
Hold down D
Current World Time City
(NYC) time
Current Home City (TYO) information
New Home City
E-16
3. After the setting is the way you want, press A to return to the Timekeeping
Mode.
Note
After you specify a city code, the watch will use UTC* offsets in the World Time
Mode to calculate the current time for other time zones based on the current time
in your Home City.
*
Coordinated Universal Time, the world-wide scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
E-18
World Time Mode
Approximate Elapsed Time
New Home City (NYC) time
New World Time City
(TYO) time
New Home City (NYC) information
Stopwatch Mode
Countdown Timer Mode
Moving the Hands Out of the Way for Better Viewing
You can use the procedure below to temporarily move the hour and minute hands
out of the way to better view what is on the display.
1. While holding down B, press C.
This will cause the hour and minute hands to move to a location where they do
not block your view of the World Time and/or digital display.
Modules 5382, 5465
Flashes while the hands are moved out of the way.
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
Each press of A cycles the Home City information as
Home Time :
shown below.
hour and minutes
Month-Day
Day of the Week
A
Home City information
World Time :
hour and minutes
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City, and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
1. In the Timekeeping Mode, hold down A until ADJ
City Code
appears.
This indicates the city code setting mode.
The hour and minute hands automatically move out of
the way at this time (page E-13).
2. Press D (East) and B (West) to select the city code
you want to use as your Home City.
Keep pressing D or B until the city code you want
to select as your Home City appears on the display.
For details about city codes, see the "City Code
Table" at the back of this manual.
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down A until ADJ
DST indicator
appears.
This indicates the city code setting mode.
The hour and minute hands automatically move out of
the way at this time (page E-13).
2. Press C to display the DST setting mode.
3. Press D to toggle between Daylight Saving Time (ON)
and Standard Time (OFF).
Note that you cannot switch between daylight saving
time and standard time while UTC is selected as your
Home City.
4. After the setting is the way you want, press A to
return to the Timekeeping Mode.
The DST indicator appears to indicate that Daylight
Saving Time is turned on.
Alarm Mode
E-11
Module 5508
E-13
Seconds
Hour : Minutes
A
A
PM indicator
A
E-15
E-17
E-19
Advertisement
