Table of Contents
Advertisement
Operation Guide 5269
E-70 Troubleshooting
E-75 Specifi cations
E-10
Selecting a Mode
•
The illustration below shows which buttons you need to press to navigate between
modes.
To return to the Timekeeping Mode from any other mode, hold down C for about
•
two seconds.
In any mode, press L to illuminate the display.
•
Alarm Mode
Alarm Mode
Stopwatch Mode
Stopwatch Mode
E-12
General Functions (All Modes)
The functions and operations described in this section can be used in all of the modes.
Auto Return Features
•
If you do not perform any operation for a certain amount of time in certain modes as
shown in the table below, the watch will automatically return to the Timekeeping
Mode.
Mode
Digital Compass, Thermometer
Sunrise/Sunset, Moon Age, Alarm
•
If you leave a setting screen (one with fl ashing digits) on the digital display for two
or three minutes without performing any operation, the watch exits the setting
screen automatically.
E-14
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
Each press of A in the Timekeeping Mode toggles the digital display between the
•
current date and the current time.
•
You can select one of the two following Date Screen display formats: SUN 6.30 or
SUN 30.6. For information about how to select the format, see "Date Display
Format" under "To change the current time and date settings" (page E-22).
Date screen
Day of week
Month Day
E-16
2. Press D (East) and B (West) to scroll through city names until the one you want
to use as your Home City data is displayed.
3. Press C to display the DST setting screen.
4. Press D to toggle between Daylight Saving Time (DST ON) and Standard Time
(DST OFF).
5. When the setting is the way you want, press A twice to
return to the Timekeeping Mode.
•
The DST indicator appears to indicate that Daylight
Saving Time is turned on.
Note
•
After you specify city data, the watch will use UTC*
offsets to calculate the current time for other time
Setting
Setting
zones based on the current time in your Home City.
* Coordinated Universal Time, the world-wide
DST indicator
DST indicator
scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
E-18
Moon Age Mode
Moon Age Mode
Countdown Timer Mode
Countdown Timer Mode
No operation time
1 to 2 minutes
2 to 3 minutes
Regular timekeeping screen
Hour : Minutes
Seconds
Mode Reference Guide
Your watch has 9 "modes". The mode you should select depends on what you want to do.
To do this:
•
View the current time and date in the Home City
•
Confi gure Home City and daylight saving time (DST) settings
•
Confi gure current location latitude and longitude settings
•
Confi gure time and date settings
•
Determine your current bearing or the direction from your current
location to a destination as a direction indicator and angle value
•
Determine your current location using the watch and a map
Determine the temperature at your current location
View the sunrise and sunset times for a specifi c date
Determine a Moon age value
Set an alarm time
Use the stopwatch to measure elapsed time
Use the countdown timer
View the current time in one of 48 cities (31 time zones) around the globe World Time Mode
Timekeeping Mode
Timekeeping Mode
Sunrise/Sunset Mode
Sunrise/Sunset Mode
World Time Mode
World Time Mode
Initial Screens
When you enter the Sunrise/Sunset Mode, Digital Compass Mode, Alarm Mode, or
World Time Mode, the data you were viewing when you last exited the mode will
appear fi rst.
Scrolling
The B and D buttons are used on the setting screen to scroll through available
settings on the digital display. In most cases, holding down these buttons during a
scroll operation scrolls through the data at high speed.
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
1. In the Timekeeping Mode, hold down A for at least two
City Name
City Name
seconds until ADJUST appears on the digital display.
This is the setting mode. Release A after ADJUST
appears.
•
The city name of the currently selected Home City
data will appear on the digital display with an arrow
( ) fl ashing to the left.
•
The watch will exit the setting mode automatically if
you do not perform any operation for about two or
three minutes.
•
For details about city data, see the "City Data Table"
at the back of this manual.
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down A for at least two
seconds until ADJUST appears on the digital display.
Release A after ADJUST appears.
•
The name of the city currently selected as your
Home City will appear on the digital display with an
arrow ( ) fl ashing to the left.
2. Press C to display the DST setting screen.
Setting
Setting
3. Press D to toggle between Daylight Saving Time
DST indicator
DST indicator
(DST ON) and Standard Time (DST OFF).
4. When the setting is the way you want, press A twice to
return to the Timekeeping Mode.
•
The DST indicator appears to indicate that Daylight
Saving Time is turned on.
Enter this mode:
See:
Timekeeping Mode
E-16
Digital Compass
E-29
Mode
Thermometer Mode
E-43
Sunrise/Sunset Mode
E-49
Moon Age Mode
E-52
Alarm Mode
E-54
Stopwatch Mode
E-58
Countdown Timer Mode
E-60
E-63
E-11
Digital Compass Mode
Digital Compass Mode
Thermometer Mode
Thermometer Mode
E-13
E-15
E-17
E-19
Advertisement
Table of Contents
