Advertisement
4
1.2
LOWER MOUNTING BRACKETS
Assemble the left side Lower Bracket to the Ladder using the
2.1
indicated hardware. The bolts must screw into bolt holes #3
and #5 of the Hanger Connector. Do not tighten until Step 2.2
#3
#5
M8 x 20MM (1X)
Lock Washer (1X)
Flat Washer (1X)
Prime Design Limited Warranty. Seller's sole and exclusive warranty (and Buyer's sole and exclusive remedy and Seller's entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the "Prime Design Limited Warranty"). ▪ TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.'s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
Push the Upper Bracket
1.3
up until the Bracket Plate
stops, and torque Bolts to
90 in-lb.
INSTALLER NOTE: Left
and Right Mounts have
Carriage Bolt Head
facing inward
Assemble the right side Upper Bracket to the Ladder using the
1.4
indicated hardware. The bolts must screw into bolt holes #1,
and #3 of the Hanger Connector. Repeat Step 1.2 to attach the
right side Upper Bracket.
Push the Upper Bracket
down until the Bracket
1.5
Plate stops, and torque
Bolts to 90 in-lb.
#1
#3
2.2
Push the Lower Bracket
2.3
down until the Bracket Plate
stops, and torque Bolts to
90 in-lb.
Advertisement
