Hotpoint AH12E07D Owner's Manual And Installation Instructions page 8

Wall Thermostat Installation (Cont)
CAUTION
UNIT DAMAGE HAZARD
damage or improper operation. Improper wiring may
damage unit electronics. Common busing is not
permitted. Damage or erratic operation may result.
NOTE:
4-WAY
connection only.
heat pump or no heat pump.
(on or auto),the fan speed is determined by how the
terminal block.
setting.
8
FRONT DESK CONTROL
The unit is designed to work with a switch signal Front
Desk Control. The system is designed such that
the front desk control switch for a particular room is
desk control switches and wiring are provided by
others.
terminals.
To Enable Front Desk Control, turn off power to the
unit and move the dipswitch to the down position.
If the front desk switch is open, the unit stops operating.
signal from the unit completes the circuit and tells the
unit to turn on and follow the commands of the unit/
remote thermostat.
Unit must be powered OFF to change dip switch
settings.
Front
49-5000684 Rev. 1