At The End Of Preparation; Customising The Quantity In The Cup; Customising The Hot Water Quantity; Measuring Water Hardness - DeLonghi MAGNIFICA EVO ECAM29.6Y Series Instructions For Use Manual

ternatively, you can select pre-ground coffee and then add one
measure of coffee as indicated in the Quick Guide (

5.3 At the end of preparation

• To prepare a number of cappuccinos and milk
based coffees, only clean the milk container
after you have prepared the last beverage.
• If there is some milk left, place the
container in the refrigerator immediately after cleaning.
• For optimum results over time, clean the Lattecrema sys-
tem thoroughly as described in chapter "12. Cleaning the
milk container".

5.4 Customising the quantity in the cup

1. Press and hold the button corresponding to the milk bev-
erage to programme for a few seconds. The light flashes
quickly to indicate you are in the settings menu. Delivery
begins;
2. Once the cup is filled to the desired level, press the bever-
age button again. Delivery of the first ingredient stops and
delivery of the second ingredient begins;
3. Once the cup is filled to the desired level, press the bev-
erage button again. Delivery stops and the quantity is
memorised.
Please note!
• To cancel the current programme, press a button correspond-
ing to another beverage
• For the My Latte beverage, only the quantity of coffee can be
programmed, while all the milk will be used as in the recipe.

6. CUSTOMISING THE HOT WATER QUANTITY

1. Press and hold the Hot water button for a few seconds.
The light flashes quickly to indicate you are in the settings
menu. Delivery begins;
2. Once the cup is filled to the desired level, press the bev-
erage button again. Delivery stops and the quantity is
memorised.
Hot water
Please note!
To cancel the current programme, press a button corresponding to
another beverage

7. MEASURING WATER HARDNESS

The descaling alarm is displayed after a period of time es-
tablished according to water hardness. The machine is set by
default for a hardness value of "4". The machine can also be
Default Programmable (ml)
(ml)
250 from ≃ 20 to ≃ 420
programmed according to the hardness of the water supply
in the various regions, so that descaling is required less often.
).
1. Remove the indicator paper from its packaging. If provided
with your model, you will find it attached to the Quick Guide.
2. Immerse the paper completely in a glass of water for
about one second.
3. Remove the strip from the water and shake lightly. After
about a minute, 1, 2, 3, or 4 red squares appear, depend-
ing on the hardness of the water. Each square corresponds
to one level.
Total Hardness Test
See instructions in section "10. Settings menu" to set the machine.

8. WATER SOFTENER FILTER

To ensure the performance of the machine remains constant
over time, we recommend using a De'Longhi water softener
filter and replacing it regularly. To purchase the filter, consult
the www.delonghi.com website.

8.1 Replacing the filter

Please note!
After two months (see date indicator) or when the appliance
has not been used for 3 weeks, the filter should be replaced
even if the message has not yet appeared.

8.2 Removing the filter

If you want to use the appliance without the filter, you must
remove it and notify the appliance of its removal.
1. Extract the water tank and exhausted filter;
21
Hardness
1
Low
2
Medium
3
Medium/High
4
High
EAN: 8004399327252