Memory Card Storage - Larson Electronics EXPCMR-CER-IP-POE-4MP-IR-FLX.23-JB.3.SFC User Manual

Memory Card Storage

NOTE: This function is not supported by some models, and may vary with models, please see the
actual model for details. Memory storage is recommended when the camera operates in stand-alone
mode.
Memory card storage is used to save videos and snapshots to the memory card directly.
Manual storage
The camera records live video repeatedly if manual storage is enabled.
1. Click Setup > Storage > Storage.
2. Enable memory card storage and modify the settings as required. The following table describes
some major parameters.
Parameter Description
Storage resource type.
Note:
Storage
first. Then Click Format and then click OK to confirm the operation. The
Medium
system will restart when the format is completed.
Information about the total and free space is displayed.
Overwrite: If there is no free space in the memory card, new data will
overwrite the existing data repeatedly.
When Storage
Full
Stop: If there is no free space in the memory card, new data will not be
saved to the memory card.
When an alarm is raised, the camera is triggered to record live video and
Post-Record(s)
continues recording for a set post-record time after the alarm is cleared.
3. Click Save.
To format the memory card, disable the storage function for the card
48