Larson Electronics EXPCMR-CER-IP-POE-4MP-IR-FLX.23-JB.3.SFC User Manual page 27

Parameter Description
Control image signals so that the camera outputs standard video signals
according to the light condition.
Gain (dB)
NOTE:
Manual or Gain Priority.
Improves image brightness in low light conditions.
Slow Shutter NOTE:
Shutter Priority and when Image Stabilizer is disabled.
Slowest Set the slowest shutter speed that the camera can use during exposure.
Shutter NOTE:
Adjust the compensation value as required to achieve the desired effects.
Compensation NOTE:
Manual.
Set the way the camera measures the intensity of light.
Center-Weighted Average Metering: Measure light mainly in the central part
of images.
Evaluative Metering: Measure light in the customized area of images.
Metering
Highlight compensation: Ignore the brightness of the overexposed area of
Control
images. But selecting this setting will decrease the overall brightness of the
image.
NOTE:
Manual.
Automatic: The camera outputs the optimum images according to the light
condition. In this mode, the camera can switch between night mode and day
mode automatically.
Day/Night Night: The camera provides high-quality black and white images using the
Mode existing light
Day: The camera provides high-quality color images using the existing light.
Input Boolean: The camera switches between day mode and night mode
based on the alarm input.
Light threshold for switching between day mode and night mode. A higher
sensitivity means that the camera is more sensitive to the change of light and
Day/Night
becomes more easily to switch between day mode and night mode.
Sensitivity
NOTE:
Automatic.
Set the length of time before the camera switches between day mode and
night mode after the conditions for switching are met.
Day/Night
Switching(s) NOTE: You can set this parameter only when Day/Night Mode is set to
Automatic.
Enable WDR to distinguish the bright and dark areas in the same image.
WDR
NOTE:
You can set this parameter only when Exposure Mode is set to
You can set this parameter only when Exposure Mode is not set to
You can set this parameter only when Slow Shutter is set to On.
You can set this parameter only when Exposure Mode is not set to
You can set this parameter only when Exposure Mode is not set to
You can set this parameter only when Day/Night Mode is set to
You can set this parameter only when Exposure Mode is set to
27