Larson Electronics EXPCMR-CER-IP-POE-4MP-IR-FLX.23-JB.3.SFC User Manual page 45

Item Description
With Trigger E-mail selected, the camera will automatically send snapshots to
the specified E-mail address when an alarm is triggered.
Trigger
E-mail
NOTE:
function.
With Image Storage enabled, the camera automatically saves a snapshot to the
Image storage after an alarm is triggered.
Storage NOTE:
before using this function.
Select the check box and set the start and end times during which motion
detection alarm is effective. You can directly drag the mouse to draw a plan and
click Edit to edit time periods in the table. The time periods cannot overlap. The
camera reports alarms during the specified period(s) only.
You can select from Monday to Sunday and set four periods for each day.
Enable Plan
Drag the mouse to draw a plan
NOTE:
8.0. After setting the plan for one day, you can apply the same settings to other
days by clicking Copy and Paste.
7. Click Save.
Make sure you have completed
Make sure you have completed
Plan drawing using a mouse is only supported by IE versions later than
45
E-Mail and before using this
Snapshot
Memory Card Storage
Edit time periods in the table
and
Snapshot