Advertisement
3.
LCD Screen operation - Section G
Dispense Times
Air Inlet Filter
The Zenith HydroTap air filter is conveniently located on the outside of the
condenser. The filter screen is a sliding fit in the plastic housing on the side
of the under sink unit. The screen may be removed for cleaning, by sliding it
forward. This needs to be inspected at least quarterly, cleaned and replaced
if damaged.
For best performance the unit should only be operated with a clean
Note:
air filter screen, correctly fitted in place. Maintain, at least, a 50mm air gap
in front of the screen at all times. Take care not to allow cloths or other soft
materials to accidentally block the air inlet.
802262NZ - Chilled HT User Guide - 11.16 - v2.01
The ability to change the maximum
dispensing time for the chilled water has
been introduced. The default settings
for the maximum dispensing times is
15 seconds. Here, the operator may
change the dispensing time to between
5 and 15 seconds, in increments of 1
second. To edit the dispensing times:
Press the [MENU] button for main
1.
menu.
Press the [Setting] button.
2.
Press the [Dispense Time] button.
3.
Select the option to change and
4.
scroll using the up and down arrow
Keys
Filter Maintenance
Page 17 of 20
Advertisement
