Advertisement
3.
LCD Screen operation - Section G
Filter
Zenith HydroTap G4 allows the user to adjust filter life and edit filter usage.
To edit the filter life:
Note:
Filter Life increases in 500 litre increments to a maximum of 10000 litres.
Factory set at 6000 litres.
Page 14 of 20
Note: The filter life may be set as a
function of Litres used, or in months
from the filter change. When the first of
these functions is reached (i.e. Litres or
months expired), the filter warning light
will be illuminated on the tap.
Either of these functions may be
disabled (See below).
Press [MENU] button for main
1.
menu.
Press [Setting] button.
2.
Press [Filter] button.
3.
Press [Filter Life] button, for
4.
Internal or External filter.
To change filter life, first select
5.
filter life (Litres) or filter life
(Months), then djust using the up or
down arrows.
To edit the filter usage:
This function is to reset the Filter
Change display after a filter has reached
the end of its life (refer to "Replace
Filter Instructions" section of this
document).
Press the [MENU] button for main
1.
menu.
Press the [Setting] button.
2.
Press the [Filter] button.
3.
Press the [Edit Filter] button for
4.
Internal or External filter.
To edit, select Edit Usage(Litres) or
5.
Edit Usage (Months), then adjust
using the up or down arrows.
802262NZ - Chilled HT User Guide - 11.16 - v2.01
t
ions
Advertisement
