Zanussi ZOU 464 User Manual page 38

To perform this operation correctly, proceed as
follows:
a) the decorated internal pane with a frame on the 4 sides
must be reassembled so that the screen-printing is facing
outwards. The side of the pane of glass is correct if you
do not feel any roughness near the screen printing when
you pass your fingers over the surface.
The internal pane of glass must be put back into the right seats
as shown in Fig. 8.
After the panes of glass have been reassembled in the oven
door, perform the procedure described in point 8. in reverse
to ensure they are locked.
Do not clean the oven door when it is still hot,
as the glass could shatter. If scratches or deep
cracks are noted on the surface of the glass,
contact the authorised Assistance Centre for
replacing the glass.
Models in stainless steel or aluminium: It is
advisable to clean the oven door and control panel
in stainless steel or aluminium only with a moist
sponge, carefully drying with a soft cloth after
cleaning. Never use steel wool, acids or abrasive
products as they can damage the surface.
How to clean the oven door seal
A rubber seal around the oven opening guarantees correct
operation.
Check the condition of this seal periodically.
If it has to be cleaned, do not use abrasive
objects or substances. If you notice that the
seal is damaged, contact your local service
centre and do not use the oven until it has been
repaired.
38
Fig. 8