Burner Assembly - State Water Heaters 120 Series Service Handbook

burner assembly

The Burner is a radial design burner with a steel fiber jacket on the outer surface and is part of a larger Burner
Assembly. Figure 8 and Figure 9 below show side views of the complete Burner Assembly removed from
the water heater with key components identified. See the exploded view of the Combustion Blower & Burner
Assembly on page 9 also.
BURNER ADAPTER
WIRING HARNESS
IGNITER/FLAME
SENSOR
BLOWER
FLANGE
BURNER ADAPTER
WIRING HARNESS
IGNITER/FLAME
SENSOR
BLOWER
FLANGE
12
BURNER ASSEMBLY
RIGHT SIDE VIEW
BURNER FLAME
ADAPTER SENSOR
Figure 8
BURNER ASSEMBLY
LEFT SIDE VIEW
BURNER
IGNITER
ADAPTER
Figure 9
Servicing should only be performed by a Qualified Service Agent
BURNER BURNER
FLANGE &
GASKET
BURNER BURNER
FLANGE &
GASKET