Mode 5 - Beverage Mode - acaia AP009 User Manual

Mode 5 - Beverage Mode

• There are two different weighing units in Beverage Mode: gram and ounce.
• As soon as the weight is stabilized or the tare button is pressed, the next step will show in
the display."---" indicates the scale is performing auto-tare.
• AFTER the process is completed and the filter is removed, the display will blink and flash
the time elapsed for the brew, total amount of water added, beverage weight in the carafe,
and the coffee-to-beverage ratio at the end of the brew.
Display
Action
Tare Weight
Next Step
Previous Step
Stop Timer
Reset Mode
Switch Mode
This mode is designed to measure the coffee-to-beverage
ratio. It is one of the most consistent methods for measuring
pour over extraction. With this mode, you will be able to see
the time elapsed for the brew, total amount of water added,
beverage weight in the carafe, and the coffee-to-beverage
ratio at the end of the brew.
Action / Description
Put the carafe/cup on the scale, press and hold the Tare button to
go to the next step.
Put the filter/dripper on the carafe/cup, press and hold the Tare
button to save the dripper weight.
Measure the amount of coffee beans you want to use. When
you've reached the target coffee bean weight, press and hold the
Tare button to save the weight.
The timer starts when water pour is detected. The timer stops
when you tap the Power button or remove the filter/dripper.
Remove the filter/dripper to proceed.
After the filter/dripper has been removed, the scale will display
the final time and weight, the beverage weight, and the coffee-to-
beverage ratio.
Operation
Tap Tare button
Press and hold Tare button
Press and hold Power button between the steps
Tap Power button
Double tap Tare button
Press and hold Power button
9