Models Covered; Standard Features - AEC TDH-6 Series Operation And Installation Manual

1-3

Models Covered

1-4

Standard Features

Page 8
This manual lists installation, operation, and maintenance
instructions for the TDH-6 Series hot oil large temperature control
unit.
Model numbers are listed on the serial tag. A model number
followed by indicates a specially constructed unit, and not all
-Q
information in this manual may apply. Make sure that you know
the model number, serial number, and operating voltage of your
unit if you contact Sterling, Inc.
• E5CK, ¼ DIN controller; includes diagnostic features with
indicator and warning status lights
• Non-fused lockable rotary disconnect
• Dual stage immersion heater with IEC contactors
• 550°F (288ºC) maximum operating temperature
• Branch fusing
• System status graphic display
• Pressure switch for low pump pressure shut-down
• NEMA 12 electrical enclosure
• UL listed subpanel
• To Process pressure gauge
• Independent safety thermostat
• Y strainer on From Process line
• A packed positive displacement pumps capable of reversing
to evacuate the process
• Easily removable panels for quick access to internal
components
• Audible alarm
TDH-6 Series Hot Oil Large Temperature Control Units