Table of Contents
Advertisement
5
5-1
The Microprocessor Controller
Page 34
Using Controls and Indicators
The controller is an easy-to-operate microprocessor-based PID
control device. When the process reaches the set point, the PID
control cycles the cooling valve and/or immersion heater to
maintain the proper leaving fluid temperature.
The controller is fully factory tested. Set the process temperature
set point you want and the controller does the rest.
Built-in range of operation on the controller is 0°F to 550°F (-18ºC
to 288ºC).
Typical E5CK Graphic and Button Control Panel
Figure 4
TDH-6 Series Hot Oil Large Temperature Control Units
Advertisement
Table of Contents
