Table of Contents
Advertisement
Safety Considerations
TDH-6 Series Hot Oil Large Temperature Control Units
AEC's TDH-6 Series large hot oil temperature control units are
designed to provide safe and reliable operation when installed and
operated within design specifications, following national and local
safety codes.
To avoid possible personnel injury or equipment damage when
installing, operating, or maintaining this equipment, use good
judgment and follow these safe practices:
Follow all SAFETY CODES.
Wear SAFETY GLASSES and WORK GLOVES.
Disconnect and/or lock out power before servicing or
maintaining the hot oil temperature control unit.
Use care when LOADING, UNLOADING, RIGGING, or
MOVING this equipment.
Operate this equipment within design specifications.
OPEN, TAG, and LOCK ALL DISCONNECTS before
working on equipment. You should remove the fuses and carry
them with you.
Make sure the hot oil temperature control unit and components
are properly GROUNDED before you switch on power.
Do not jump or bypass any electrical safety control.
Do not restore power until you remove all tools, test
equipment, etc., and the hot oil temperature control unit and
related equipment are fully reassembled.
Only PROPERLY TRAINED personnel familiar with the
information in this manual should work on this equipment.
Page 3
Advertisement
Table of Contents
