Table of Contents
Advertisement
Electrical System Controls
Page 12
AEC stocks many lengths of flexible metal hose; the part number
is 572-16969. State the length of hose you want when ordering.
!
WARNING
Component failure may result in high-temperature
oil spray, causing serious injury or death.
Make sure hoses, valves, and other components
installed in your process can withstand maximum
temperature and pressure of the TDH-6 unit; check
unit nameplate for specific capacities.
All components must be carefully inspected for
condition before installing. Make sure you have
factory components if you have any doubt.
The electrical controls of your
engineered for reliability, safety and simplicity of operation. The
switches are clearly labeled as to their function. Your
has a system status board so you can evaluate the status and
performance of the unit at a glance. Pilot lights are provided to
indicate key unit functions.
An audible alarm is standard with your unit. The alarm will sound
in the event of the following conditions:
• motor overload
• safety thermostat trip ( over temperature )
• low fluid pressure
• low fluid level (optional)
• high fluid level (optional)
Push the
ALARM SILENCE
Chapter 4 for more information on control functions.
TDH-6 Series Hot Oil Large Temperature Control Units
TDH-6
unit are specially
button to silence the alarm. See
TDH-6
unit
Advertisement
Table of Contents
