Table of Contents
Advertisement
2
2-1
Unpacking and Inspection
2-2
In the Event of Shipping Damages
According to the contract terms and conditions of the Carrier,
the responsibility of the Shipper ends at the time and place of shipment.
TDH-6 Series Hot Oil Large Temperature Control Units
Shipping Information
You should inspect your AEC TDH-6 Series hot oil large
temperature control unit for possible shipping damage. If the
container and packing materials are in re-usable condition, save
them for reshipment if necessary.
Thoroughly check the equipment for any damage that might have
occurred in transit, such as broken or loose wiring and
components, loose hardware and mounting screws, etc. In case of
breakage, damage, shortage, or incorrect shipment, refer to the
following sections.
Important!
Notify the transportation company's local agent if you discover
damage.
Hold the damaged goods and packing material for the
examining agent's inspection. Do not return any goods to
AEC, Inc. before the transportation company inspection
and authorization.
File a claim against the transportation company. Substantiate
the claim by referring to the agent's report. A certified copy of
our invoice is available upon request. The original Bill of
Lading is attached to our original invoice. If the shipment was
prepaid, write us for a receipted transportation bill.
Advise AEC, Inc. regarding your wish for assistance and to
obtain an RGA (return goods authorization) number.
Page 17
Advertisement
Table of Contents
