Operation; Switching On The Set-Top Box; Applying The Osd Menu; Initial Installation - Gigaset M270T Manual

Operation

Operation

Switching on the set-top box

As soon as you have connected the set-top box's pluggable power supply to a power
outlet, the set-top box switches on, the LED on the front housing lighting up in green.
Note: If the LED is showing red light, switch the device on by pressing
control.
1. Switch on all devices connected to the set-top box.
2. Activate that AV channel or input of your TV set to which you have connected the
set-top box.
Note: For further information refer to the Operating Instructions of your TV set.

Applying the OSD menu

Via the OSD menu you are enabled to carry out settings on the device using your RC
unit.
Note: Also observe the information and help messages displayed on the screen.
This is how you use the on-screen display functionality:
v
OSD navigation and selection of menu items. The selected menu item is framed
with colour.
o
Confirm your selection. The selected menu item is now activated or executed.
!
Hide the OSD or exit an activated menu.
‰
The remote control's red, green, yellow and blue keys are assigned different
functionalities, dependent on the currently selected menu.
If a button of the OSD shows red, green, yellow or blue colour, the respective
function is triggered by pressing the button of the same colour on the remote
control.
Notes are displayed on the lower screen edge of the OSD, on which buttons to use
for specifying the settings of the currently activated menu.

Initial installation

You are presented with the initial installation menu. This menu is displayed only at first
start of the device or when you have returned to factory settings to support you in
installing your set-top box.
1. Specify your preferred Menu Language and confirm your selection.
2. Specify your preferred Country, Screen Format and TV Output Format. Go to the
Apply bar and confirm your selection.
8
A
of the remote