Table of Contents
Advertisement
3. Attach the Left Upright (62) to the Base (69) with
two 3/8" x 2 1/4" Screws (1) and two 3/8" Star
Washers (2); do not fully tighten the Screws
yet. Be careful not to pinch any wires.
4 . Partially tighten two 3/8" x 1 1/2" Screws (3) with
two 3/8" Star Washers (2) and two 3/8" Nuts (4)
as shown into the Base (69) and the Left Upright
(62); do not fully tighten the Screws yet. Be
careful not to pinch any wires.
Attach the Right Upright (not shown) as
described in steps 3 and 4. Note: There are no
wires on the right side.
3
1
4
62
69
3
9
1
2
62
2
69
4
3
2
Advertisement
Table of Contents
