ICON Health & Fitness Pro-Form PFTL99117.0 User Manual page 15

CONSOLE DIAGRAM
FEATURES OF THE CONSOLE
The treadmill console offers a selection of features
designed to make your workouts more effective and
enjoyable. When you use the manual mode, you can
change the speed of the treadmill with the touch of a
button. As you exercise, the console will display instant
exercise feedback. You can even measure your heart
rate with the optional chest heart rate monitor (see
page 18).
To turn on the power, see this page. To use the
manual mode, see page 16. To connect your tablet
to the console, see page 17. To connect your heart
rate monitor to the console, see page 18. To use
the information mode, see page 18. To
adjust the height of the desk, see page 19.
Note: The console can display speed and distance in
either miles or kilometers. To fi nd which unit of mea-
surement is selected, see THE INFORMATION MODE
on page 18. For simplicity, all instructions in this sec-
tion refer to miles.
IMPORTANT: If there are sheets of plastic on the
console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the treadmill. The fi rst time you use
the treadmill, observe the alignment of the walking
belt, and center the walking belt if necessary (see
page 24).
HOW TO TURN ON THE POWER
IMPORTANT: If the treadmill has been exposed to
cold temperatures, allow it to warm to room tem-
perature before you turn on the power. If you do
not do this, you may damage the console displays
or other electrical components.
Plug in the power cord (see
page 14). Next, locate the
power switch on the tread-
mill frame near the power
cord. Press the power
switch into the reset
position.
Next, stand on the foot
rails of the treadmill.
Find the clip attached
to the key and slide the
clip onto the waist-
band of your clothes.
Then, insert the key
into the console. After
a moment, the displays will light. IMPORTANT: In an
emergency, the key can be pulled from the con-
sole, causing the walking belt to slow to a stop.
Test the clip by carefully taking a few steps back-
ward; if the key is not pulled from the console,
adjust the position of the clip.
15
Reset
Key
Clip