8-channel digital output and 8-channel digital input data acquisition module (8 pages)
Summary of Contents for ICP DAS USA PET-2242 Series
Page 1
(P)ET-2242 Series Quick Start v1.2, May 2023 Packing List In addition to this guide, the package includes the following items: (P)ET-2242 / (P)ET-2242-32 X 1 Quick Start x1 Resources How to search for drivers, manuals and Technical Support spec information on ICP DAS website. service@icpdas.com ...
Page 2
Connecting the Power and Host PC Make sure your PC has workable network settings. Disable or well configure your Windows firewall and Anti-Virus firewall first, else the “Search Servers” on Chapter 3 may not work. (Please contact with your system Administrator) Connect both the (P)ET-2242 and your PC to the same sub network or the same Ethernet switch.
Page 3
Wiring the DI and DO for Self-test A tip for insert/remove the wire to the connector. 2. While holding the Continue holding the screwdriver in place, screwdriver in place insert/remove the wire into 1. Use the blade of the the terminal block.
Configuring Network Settings 1) Run the eSearch Utility. eSearch Utility download link: https://www.icpdas.com/en/download/index.php?nation=US&kind1=&mo del=&kw=esearch 2) Click the “Search Servers” to search your (P)ET-2242. 3) Double-click your (P)ET-2242 to configure the settings. Factory Default Settings of (P)ET-2242: IP Address 192.168.255.1 Subnet Mask 255.255.0.0...
Page 5
Testing your Ethernet I/O Module Click “Search Servers” button again to ensure the (P)ET-2242 is working well with new configuration, than click the name of (P)ET-2242 to select it.。 Click the “Web” button to log in to the web configuration pages.(Or enter the URL address of the (P)ET-2242 in the address bar of the browser.) For the first time using the module, you have to change the password and click the “Submit“...
Page 6
The “Home” page allows for a simple test to verify the Digital Output functionality. In the “Digital I/O” section, click the “DO0” button to turn it ON (Red). Verify that the output LED status is “ON”. ...