Controller Functions; Operation Mode; Normal Mode; Holiday Mode - Tech Controllers EU-M-12 User Manual

VI. CONTROLLER FUNCTIONS
Menu

3. OPERATION MODE

The function allows you to activate the selected operation mode in all controllers for all zones. The user has a choice of
normal, holiday, economy and comfort modes. The user can edit the factory mode values using the EU-M-12 panel or the
EU-L-12 and EU-ML-12 controllers.

3.1. NORMAL MODE

The pre-set temperature depends on the set schedule.
Menu → Zones → Master Module → Zone 1-8 → Operation Mode → Schedule... → Edit

3.2. HOLIDAY MODE

The pre-set temperature will depend on the settings of this mode.
Menu →Fitter's menu → Master Module → Zones > Zone 1-8 → Settings → Temperature Settings > Holiday Mode

3.3. ECONOMY MODE

The pre-set temperature will depend on the settings of this mode.
Menu → Fitter's menu → Master Module → Zones > Zone 1-8 → Settings → Temperature Settings > Economy Mode

3.4. COMFORT MODE

The pre-set temperature will depend on the settings of this mode.
Menu → Fitter's menu → Master Module → Zones > Zone 1-8 → Settings → Temperature Settings > Comfort Mode
CAUTION
•
Changing the mode to holiday, economy and comfort will apply to all zones. It is only possible to edit the setpoint
temperature of the selected mode for a particular zone.
•
In operation mode other than normal, it is not possible to change the pre-set temperature from the room controller
level.
Operation mode
Zones
Controller settings
Software update
Fitter's menu
Service menu
Factory settings
12