1
PITT
cooking Installation dimensions
®
Installation dimensions in mm:
Min. 47
Min. 600
Support beam
1
Support beam
1
1
Note: Check the installation manual to install the support beams according to the correct dimensions. This is
necessary in order to install the bottom cover correctly.
•
A cooking module cannot be installed over a partition of cabinets. It has to be accessible in case it needs servicing.
•
When PITT
cooking is combined with a drawer cabinet, always be aware of the measurements of the unit and the
®
support bar. The height of the unit and the support bar is 119 mm, measured from the top of the worktop (Fig.2).
•
To prevent bending of the worktop the appliance need to be supported by two PITT
(Fig. 2 and 3).
PITT
cooking system
®
Installation and handling
instructions
Min.
150
Min. 4
Max. 35
Min. 50
fig. 1
fig. 3
PITT
cooking system
®
Installation manual
Min.
650
Support beams
fig. 2
PITT
cooking system
®
Installation video
15
Min.
450
89 mm
119 mm
afb. 2
cooking support bars
®
PITT
cooking Outdoor
®
Installation manual
EN