Advertisement
1.
Crash Bar is directly mounted to the Chassis of the Motorbike, with the Two halves ( Left Hand and
Right Hand ) mounted and joined using the Side Brackets & Top bracket with a Welded Cylindrical block, as
shown in the subsequent drawings
2.
SRC's Crash Bar protects the user, in the event of a fall or skidding of the vehicle.
3.
We request you to pay attention to the Mounting Instructions in this document and follow the step-
by-step procedures.
4.
This Mounting Instruction manual is a "Do It Yourself" (DIY) fitment manual of the Accessory part to
the Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part
and its functional aspects.
5.
SRC cannot guarantee the interchangeability of the parts to any other manufacturer's accessory part.
It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.
6.
We request you to bear in mind, that the Installed part can change the driving behaviour and/or the
stability during driving or any other dynamic conditions.
7.
If you have the appropriate tools and another person to assist you in the mounting, it will help.
8.
After Completion of the Mounting and before taking on a First ride, Ensure and Check all functions of
the Vehicle. It is always advised to check loosening of the fasteners after the first 50 kilo meters of ride and
at regular intervals.
The Mounting Instructions can also be downloaded from SRC Website.
Copyright By SRC
Design and Specification are subjected to change
General Information
Page 8
Advertisement
