SRC K-VS1000-19-17-01-SL Manual page 7

Step: 9
Mount the Slider Guards (4) on each of the
Crash bar (2) and (3), and tighten the screws
fully
Use the Slider Bar as the Virtual Orientation
and looking from the front side of the
Motorbike, make one final Positioning and
Alignment of the Crash bars
Ensure mounting symmetry of the Slider Bars
visually (it must not be offset or shifted
visually when seen from the front side and
back side)
Copyright By SRC
Design and Specification are subjected to change
Page 7