Configure Openvpn Client - Milesight UF31 User Manual

you'd like to reset it to factory defaults. Then click OK button.
Then UF31 will reboot and restore to factory settings immediately.
Please wait till the STATUS LED shines in green, which means the device has already been reset to
factory defaults successfully.
Related Topic
Backup / Upgrade
Method 2:
Release the metal case and find the reset button on the mainboard, press and hold the reset button
for more than 5 seconds until LED blinks.

6.4 Configure OpenVPN Client

UF31 can work as OpenVPN clients or OpenVPN servers. We are about to take an example of
configuring OpenVPN client to connect to OpenVPN cloud.
Configuration Steps
1. Ensure the device has gotten access to the Internet.
2. Log in the openVPN cloud account, select Network section and select the service depending on
your requirement and follow the wizard to continue the settings.
52