Introduction; Receipt Of Goods And Storage - M&C 70304 Instruction Manual

6

INTRODUCTION

The compact microprocessor contolled temperature controllers type 70304 and 70304.2 are mainly used for M&C
components that have no temperature controller in their standard specification. If the temperature controller is
ordered together with an M&C component, he already is parameterized and preprogrammed. Additionally to the
controllers in dependance on the M&C device a relais with sufficient switching capacity is necessary.
The controllers have an adjustable sensor input for all common temperature sensors and they can be used as an
programmable two or three step or continious and self-optimizing controller with PID structure.
7

RECEIPT OF GOODS AND STORAGE

The temperature controllers 70304 and 70304.2 are complete pre-installed units.
• Please take the temperature controller and possible special accessories carefully out of the packaging material
immediately after arrival, and compare the goods with the items listed on the delivery note!
• Check the goods for any damage caused during delivery and, if necessary, notify your transport insurance com-
pany without delay of any damage discovered!
Note
www.mc-techgroup.com
The equipment should be stored in a protected, frost-free room!
Temperature controller 70304 | 1.02.00 7