Description; Figure 1 Display/Control Elements - M&C 70304 Instruction Manual

8

DESCRIPTION

The controller type 70304 is provided for front panel mounting and the controller type 70304.2 is provided for
rail mounting.
(1) Actual value display
red, 10mm high, 4 digits
(2)
Active Setpoint
Factory setting SP1
(3) Setpoint
Four digit, green; decimal place is configurable;
Also used for operator prompting (display of pa-
rameter and level symbols)

Figure 1 Display/control elements

8
(4)
(5)
(6)
Temperature controller 70304 | 1.02.00
PGM-key in order to select parameters
in order to change values

in order to change values

Exit-key in order to leave the levels
Indication
yellow for
- Switch status of binaryoutputs 1 – 6
(display lights up = on)
- ramp/programm function is active
- manual operation is active
16-segment display for the unit °C / °F
factory setting °C
www.mc-techgroup.com