Introduction; Receipt Of Goods And Storage - M&C 70304G Instruction Manual

6

INTRODUCTION

The compact microprocessor-controlled temperature controller type 70304G is mainly used for M&C
components that have no temperature controller in their standard specification. If the temperature con-
troller is ordered together with an M&C component, he already is parameterized and pre-programmed.
He has an adjustable sensor input for all common temperature sensors, and he can be used as a pro-
grammable two or three step or continuous and self-optimizing controller with PID structure.
7

RECEIPT OF GOODS AND STORAGE

The temperature controller is a complete pre-installed unit.
• Please take the temperature controller and possible special accessories carefully out of the packag-
ing material immediately after arrival and compare the goods with the items listed on the delivery
note!
• Check the goods for any damage caused during delivery and, if necessary, notify your transport
insurance company without delay of any damage discovered!
N O T E !
www.mc-techgroup.com
The equipment should be stored in a protected, frost-free room!
Temperature controller 70304G | 1.00.02 7