Related Manuals for M&C 701
Summary of Contents for M&C 701
- Page 1 Electronic Temperature Controller (Effective from: September 2020, Serial No. 2009143) Instruction Manual Version 1.01.00...
- Page 2 This Operating Manual does not claim completeness and may be subject to technical modifications. © 11/2022 M&C TechGroup Germany GmbH. Reproduction of this document or its content is not allowed without permission from M&C. Version: 1.01.00 Temperature controller 701 | 1.01.00 www.mc-techgroup.com...
-
Page 3: Table Of Contents
Overview of settings and functions ..............................13 Figure 9 Device function test with setpoint value of 0 °C (example) .................... 14 Figure 10 Device function test with setpoint value of 8 °C (example) .................... 14 www.mc-techgroup.com Temperature controller 701 | 1.01.00... -
Page 4: General Information
The requirements of the RoHS2 (‘Restriction of Hazardous Substances 2’) directive 2011/65/EU and its annexes are met. Declaration of Conformity The EU Declaration of conformity can be downloaded from the M&C homepage or directly requested from M&C. Temperature controller 701 | 1.01.00 www.mc-techgroup.com... -
Page 5: Safety Instructions
M&C, please be sure that it is properly packaged and shipped with protective packaging. The repaired or replaced device will be shipped free of delivery charges to the point of use. www.mc-techgroup.com Temperature controller 701 | 1.01.00... -
Page 6: Used Terms And Signal Indications
These are persons with necessary qualification who are familiar with Qualified Personnel installation, use and maintenance of the product. High voltages! Protect yourself and others against damages which might be caused by high voltages. Temperature controller 701 | 1.01.00 www.mc-techgroup.com... -
Page 7: Introduction
The digital electronic temperature controller 701 is used for the simple temperature control. It is designed in a compact construction and is suitable for mounting on top hat rails. Dimensions (H x W) are 90 x 22.5 mm [≈ 3.5” x 0.9”]. -
Page 8: Description
* Galvanic separation to the measuring input DESCRIPTION The two-step electronic temperature controller 701 has a temperature sensor input for PT100 sensors in two-wire- technique. The temperature controller is equipped with a short-circuit and sensor break protection. The desired temperature is selectable via keys. The actual value and the target value are displayed on a dot-matrix LCD. The LCD display is black and white with backlight and 64 x 80 pixel resolution. -
Page 9: Receipt Of Goods And Storage
The product label with the serial number is placed on the side of the device. INSTALLATION INSTRUCTIONS AND DIMENSIONS Figure 3 Dimensions and indication of the connection terminals The controller is designed for mounting on a top hat rail according to DIN IEC 60715. www.mc-techgroup.com Temperature controller 701 | 1.01.00... -
Page 10: Electrical Connections
Several devices can be mounted right next to each other without a minimum distance. ELECTRICAL CONNECTIONS The temperature controller 701 can be delivered with a mains voltage of 230 V 48/63 Hz or 115 V 48/63 Hz. A wrong mains voltage can destroy the device. Please ensure that the supply voltage is identical to the indication on the type plate. -
Page 11: Figure 6 Relay Output K1 (Zero-Current State)
(standard equipment of the heated sample lines) with the temperature controller. 2 Pow er 5 Sensor 6 Sensor 1 Power 3/4/5- Figure 7 Pin assignment of the heated lines /H or PSP-4M (-W) www.mc-techgroup.com Temperature controller 701 | 1.01.00... -
Page 12: Signal Types Pt100 And Thermocouple
SIGNAL TYPES PT100 AND THERMOCOUPLE The 701 can be connected to signal type PT100 or thermocouple. As standard, the 701 is linearized for a PT100 (factory setting). If you are using a thermocouple, the temperature controller needs to be linearized to the chosen thermocouple type L, J or K. -
Page 13: Overview
14.1 OVERVIEW Figure 8 Overview of settings and functions www.mc-techgroup.com Temperature controller 701 | 1.01.00... -
Page 14: Functional Test
Figure 9 Device function test with setpoint value of 0 °C [32 °F] (example) Figure 10 Device function test with setpoint value of 8 °C [46.4 °F] (example) Temperature controller 701 | 1.01.00 www.mc-techgroup.com... -
Page 15: Error Messages
Instruction for action: restart device, otherwise return device * * * * Value cannot be displayed, display overrun Instruction for action: restart device, otherwise return device DECOMMISSIONING No special measures are to be taken for decommissioning the equipment. www.mc-techgroup.com Temperature controller 701 | 1.01.00... -
Page 16: Maintenance And Repair
MAINTENANCE AND REPAIR The controller 701 is working maintenance-free for a long period of time. In case the controller is defective, please send the device to M&C TechGroup for repair. The controller is equipped with a sensor break protection that in case of need cuts off the unit as long as the defective sensor has not been exchanged.