Table of Contents
Advertisement
※ 4.2 Mounting the Inverter
4.2.1 Wall bracket installation
Dimensions of wall bracket, see Figure 4-4:
509.5mm
Figure 4-4 Dimensions of wall bracket
1)Use the inverter back bracket as the template to mark the position of 4 holes on the installation
bracket.
2)Use an electrical driller with 12mm diameter bit to drill 4 holes on the installation
bracket. See Figure 4-5 for details:
Figure 4-5 Mark the hole position and drill holes
24
3) Follow the instructions in the picture below to install the M10 bracket screws (bolt,
spring washer, flat washer) and tighten the bolts with torque wrench in the torque of 35-
40N.m, see Figure 4-6 for details:
310mm
4.2.2 Mounting the inverter
Lift the inverter, hang the back rail on the fixed back bracket carefully. See Figure 4-7 for details:
Figure 4-6 Fixing the bracket
Figure 4-7 Mounting the inverter
25
Advertisement
Table of Contents
